Can Beatbot robotic Work in Cold Weather?

The Beatbot robotic pool cleaners are developed to operate under almost any weather conditions, from cold ones, though with certain limitations. Optimal performance for the robot can be expected at temperatures between 40°F to 95°F (-4°C to 35°C); below this, the cleaning efficiency could be less, and so does the battery life. In one test done by Pool Equipment Solutions in 2023, the Beatbot was able to clean in water as cold as 45°F (7°C), but cleaning times did take longer: about 10-15% more compared with warmer weather. One of the main reasons the Beatbot may have trouble performing well in colder temperatures has to do with the properties of water. During colder temperatures, the water of the pool becomes thicker and may make the movement of the robot less smooth over the surface of the pool. With its powerful motors and advanced traction system, the Beatbot can still work in these less-than-ideal conditions. One pool service professional from Michigan emailed to say his Beatbot chugged along through a winter maintenance session, even when it plummeted to 32°F (0°C), without any real issues – other than somewhat longer cleaning cycles.

And the colder it gets, the longer it takes to recharge. In cold weather, the lithium-ion battery of the Beatbot may take 3 hours to get completely recharged, as opposed to 2.5 hours in warmer conditions. According to a pool technician in Canada, “We use Beatbot in colder months, but without any problem. However, we make sure that the pool water is not too cold over a longer period of time, because the robot runs slower and charges slower when the water is this way.

The answer to whether Beatbot can operate in cold weather is yes, but optimally, the robot works better above 4°C or 40°F. If the temperature ranges below this reading, the robot may take a little longer while completing its cleaning cycle, and batteries may not perform optimally. All the same, it remains effective for cold-weather maintenance in most regions.

For more information, visit Beatbot.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top
Scroll to Top